KMDB Kharkiv Morozov Machine Building
Design Bureau
Home :: News :: About us :: Contact :: Photos :: Video :: RSS :: Russian :
 
Oplot Main Battle Tank
Yatagan Main Battle Tank
T-80UD Main Battle Tank
Atlet Armoured Repair and Recovery Vehicle
BTR-4 Armoured Personnel Carrier
DOZOR-B Armoured Personnel Carrier
BTR-3U Armoured Personnel Carrier
 
Upgrade Packages for Vehicles...
Training Aids...
Armament...
Components...
Other Products...
Products for Civil Use...
Calculations
Hydrostatic transmissions
Programming
Foreword
Introduction
KMDB of Today
Historical Review...
Vehicles...
Conclusion
CONTACT


Atlet ARRV is made on the basis of tank OPLOT chassis that provides BREM with comparable with it dynamic and mobile characteristics, required level of protection and negotiability.

Atlet ARRV is designed for solution of a wide range of technical support tasks of tank units while performing all types of military operations under various weather and climatic conditions. It enables to solve the following tasks:

  • to conduct technical reconnaissance of the battlefield at day time and at night
  • towing of faulty and damaged armoured vehicles to the nearest shelters and damaged vehicles assembly positions (DVAP)
  • electric and air start of the serviced vehicles engines
  • assistance to crews in routine maintenance
  • load-lifting works
  • recovery of stuck and sunken armoured vehicles
  • deep-fording
  • welding and cutting works
  • earth works while arranging DVAP, access and exits, self-entrenching, etc.

Atlet ARRV is used in the composition of repair and recovery groups in the rear of tracked convoys when conducting a march, DVAPs, units and formations, recovery groups during fording operations, maintenance points, etc. They strengthen mobile maintenance means of tank battalions, division mechanized brigades and other units and formations, equipped with heavy tracked equipment.

In its layout Atlet ARRV is divided into three isolated compartments:

  • manned compartment that holds crew members
  • machinery space that holds main winch, drives reduction gears and fuel system and hydraulic drive tanks
  • engine-transmission compartment

Sections with auxiliary power unit with welding equipment and cooling system, hydraulic panels of add-on equipment, auxiliary winch and battery section as well as fuel system tanks are arranged outside on the fenders.

ENGINE-TRANSMISSION COMPARTMENT

The engine-transmission compartment of Atlet ARRV is unified with ETC of the basic tank and differs from it by availability of power take-off for functioning of add-on equipment.

ETC comprises a twin-stroke, multi-fuel in-line six-cylinder liquid cooled diesel engine and reduction gear for the add-on equipment arranged in the engine compartment. 1000 and 1200 hp engines can be fitted in the power pack.

The engine, by means of gear clutch, is connected with two planetary gear boxes that ensure torque transmission to the sprocket wheels.

The engine air supply system is of three-stages. The first stage is an inertial grid, the second and third stages is a cyclone-cassette type air cleaner with dust ejection.

Air cleaning degree is 0.998%. The power pack cooling system is liquid, closed, of ejection type and exhaust gases operated.

Reversible gear boxes that ensure pivot turn, with seven forward and five reverse gears can be fitted on the vehicle. Gear boxes are controlled frictionally, hydro-mechanically by means of two distribution gears arranged on the gear boxes housings.

MACHINERY SPACE

The machinery space, middle section of the vehicle, houses main winch, add-on equipment drives reduction gear, fuel and hydraulic systems tanks, preheater system boiler and other equipment. Main traction winch provides for recovery of the damaged, sunken and stuck tank and vehicles with traction force of 25 t, and with the help of pulley blocks for two and three branches - 50 and 75 tons respectively.

The winch is arranged inside the hull and connected with the main engine through the drives reduction gear with cut-off mechanisms.

The rope is delivered angularly to the vehicle axis through the rotary delivery unit in the hull front part. In the travelling position the delivery unit is covered by the tight casing.

The drives reduction gear, with hydraulic pumps arranged on it, ensures functioning of add-on and auxiliary equipment with the main engine running and cuts-off the main winch drive.

Atlet ARRV MACHINERY SPACE Atlet ARRV MACHINERY SPACE

MANNED COMPARTMENT

The manned compartment in the hull front part houses Atlet ARRV crew working stations, control drives, instrumentation equipment, life-supporting systems and SPTA set.

Drivers station. The hull front part contains driving compartment with controls, Atlet ARRV movement systems instrumentation equipment, dozer and crane controls and drivers seat in it. All basic controls are unified with similar systems of the basic tank and do not require additional retraining and adaptation while training of drivers.

Commanders station. In lay out, the commanders station is combined with the driving compartment with the handlers seat into one space. It holds means of communication and instrumentation equipment of NBC agents detection system, commanders sighting-observation complex arranged in the hatch with guidance drives similar to the ones of the basic tank. The complex comprises: TKN-5 commanders sight with in-built night channel, anti-aircraft mount PZU-7 sight and guidance panels, periscopic single magnification TNPO-160 type observation devices. It also houses means of communication and navigation as well as the Atlet ARRV systems control units and inner set of SPTA.

Handlers seat. The handlers seat is arranged at the left side of the manned compartment near the commanders seat. Under certain circumstances it can be used to accommodate the required specialist or other servicemen (commander, crew member from the recovered tank, etc.). FFE, HPC (hydro-pneumatic cleaning of observation devices) equipment, SPTA set, heater installation and other equipment is fitted in the handlers sector.

Atlet ARRV MANNED COMPARTMENT Atlet ARRV MANNED COMPARTMENT

Atlet ARRV SYSTEMS AND EQUIPMENT

RUNNING GEAR

The Atlet ARRV running gear is totally unified with the tank running gear and has seven rubberized road wheels and three rubberized support wheels at each side. Hydraulic shock absorbers are arranged on the first, second and sixth elements of suspension. For installation on Atlet ARRV the running gear has been modified for fitting the suspension actuators while operating with dozer and crane equipment. The suspension actuator device in travelling position is arranged on the right fender.

The caterpillar track with parallel rubber-metal pin and rubber pads in two variants - steel one with grousers and rubber-padded shoes can be supplied with Atlet ARRV. Such suspension ensures high speed of movement both on the paved roads up to 70 km/hr and cross-country up to 45 km/hr.

AUXILIARY POWER UNIT

With the purpose to save the engine life and to ensure operation of the add-on equipment with the main engine not running, the auxiliary power unit (APU) is installed on Atlet ARRV. The APU ensures operation of the crane, welding equipment, auxiliary winch, dozer equipment, charging equipment and operation of the electric equipment of Atlet ARRV at the stops. The unit comprises 30 hp D-120 engine that is interlocked through the reduction gear with the hydraulic pumps block and connected to the welding generator. It is installed on the left fender in the isolated box. There is an access to the box through the two doors. The APU filling capacity is 40 liters. The unit cooling system is combined, of electrical-hydraulic type, fan-driven and is arranged behind the APU in a single, separated by the bulkhead section.

Atlet ARRV AUXILIARY POWER UNIT

AUXILIARY WINCH

Atlet ARRV is equipped with an auxiliary winch with traction force of up to 900 kg to provide for delivery of the main winch rope, pulling of pulley blocks and other cargo handling works.

The winch is located on the left fender inside the isolated box. There are two holes for operation, maintenance, repair, installation/removal. The winch delivery unit is arranged on the front hatch. The winch is hydraulically driven from the drivers seat inside the hull.

Atlet ARRV AUXILIARY WINCH Atlet ARRV AUXILIARY WINCH

CRANE EQUIPMENT

Atlet ARRV is fitted with crane equipment for lifting-transportation operations while repairing, restoring the vehicles and semi-lifting the tank during repair of its running gear. The load at the crane hook is up to 25 t. To provide its revolutionary movement the crane is installed on the rotary platform.

Maximum crane jig swinging angle is up to 750. Operation of the crane equipment powered by the main or auxiliary engines ensures replacement any of the engines as well as replacement of other equipment on Atlet ARRV itself. The crane equipment can be controlled both from the drivers station and remotely from outside the vehicle at the distance of up to 5 m. With the help of crane equipment it is possible to remove and install the turret, engine, transmission, running gear elements, top deck plate and other elements and systems of the serviced tank as well as other equipment. For operation of the crane equipment it is necessary to level the ground, deactivate suspension by means of attached supports and use the dozer as an outrigger. In the inoperative condition the hook buckle is stored on the right fender. Canvas cover protects the crane roller block with ropes from soiling and precipitations.

Atlet ARRV CRANE EQUIPMENT

DOZER EQUIPMENT

To perform earthworks - excavation of caponiers, arrangement of DVAPs (damaged vehicles assembly positions), preparation of access and exit roads, covering up of ditches, trenches for passage of the equipment Atlet ARRV is fitted with dozer equipment. The dozer can also act as an outrigger during lifting-transportation works and as an anchor while operating with the main winch.

The dozer equipment is hydraulically driven by hydraulic pumps, main engine or auxiliary one and controlled from the drivers station.

On clay soils the output of the dozer equipment is up to 120 m3/hr. The dozer blade is 2380 mm wide. In the transportation position the dozer blade is locked by means of brace rods.

Atlet ARRV DOZER EQUIPMENT

TOWING EQUIPMENT

Atlet ARRV is fitted with rigid hitch for recovery and towing of the damaged, faulty or uncontrolled vehicles to the maintenance or repair depot.

It enables to tow the serviced vehicle or similar type tanks and vehicles on their base without any limitations as for the distance at the speed up to 25 km/hr, or according to the requirements for towing of the particular vehicle. For towing of the controlled vehicles at non-rigid hitch and for towing of Atlet ARRV itself towing hooks are welded on the hull in front and at the rear and additional towing ropes are provided in the stowage.

Atlet ARRV TOWING EQUIPMENT

WELDING PLANT

The welding plant is designed for welding and cutting works while repairing of the damaged or failed equipment. The diameter of the used electrodes is up to 5 mm, welding current is up to 300 A.

The welding plant is powered by APU and SG-10 generator. When cables and hoses from the SPTA are used the electrical and gas welding works can be carried out at the distance of up to 20 m from Atlet ARRV. The welding works should be carried out by one of the professionally trained crew members.

Atlet ARRV WELDING PLANT

FORDING EQUIPMENT

Atlet ARRV can negotiate water obstacles up to 5 m deep. In this case it is fitted with the escape-pipe, through which the crew can escape in case of emergency. One of the crew members, sitting in the pipe in the above-water position, can adjust movement of the vehicle during unequal motion when preparing for fording of tanks.

To ensure operation of the engine in the submerged position Atlet ARRV is fitted with two pipes for air intake and removal of exhaust gases. In the travelling position the pipes are stowed on the APU box top.

Atlet ARRV can negotiate water obstacles of up to 1.8 m deep without preparation and up to 5 m with preparation. After completion of fording the pipes are removed and placed to their standard place at the top of the APU section.

Atlet ARRV FORDING EQUIPMENT

EQUIPMENT FOR FIELD REPAIR

For repair and restoration of the damaged or failed serviced combat vehicles, Atlet ARRV is supplied with a set of tools and contrivances for field repair of running gear, transmission and ETC systems. All the required tools are placed in two tight containers stored on the hull top above the main winch section. If required, any of the containers can be removed from the vehicle and left near the tank, where repair works are carried out. Atlet ARRV itself can be used during recovery, transportation or other operations. Hoist cables and other transportable equipment is fixed on the containers.

Atlet ARRV EQUIPMENT FOR FIELD REPAIR

CARGO PLATFORM

To ensure transportation of spare parts, units and other equipment of total weight up to 1.5 t, Atlet ARRV is equipped with a cargo platform. It can transport engine, gear boxes, up to 5 fuel barrels as well as bulked cargo and other items if fastened by means of a set of special brackets. The platform is fixed on brackets on the top deck plate. During maintenance, the platform is opened back to the rear to provide an easy access to the filling necks and serviced systems.

Atket ARRV CARGO PLATFORM Atket ARRV CARGO PLATFORM

SMOKE LAYING EQUIPMENT

Atlet ARRV is equipped with smoke or aerosol laying system that includes 8 grenade dischargers, ensuring laying of the screen at the distance of up to 50 m from the vehicle.

Besides, Atlet ARRV is fitted with thermal-smoke screen system similar to the one used in the basic tank.

Atlet ARRV SMOKE LAYING EQUIPMENT Atlet ARRV SMOKE LAYING EQUIPMENT Atlet ARRV SMOKE LAYING EQUIPMENT

ARMAMENT

Remote controlled 12.7 mm anti-aircrtaft machine gun is mounted on the right commanders hatch, which is designed for destruction of ground unarmoured or light armoured equipment as well as the enemys manpower and low flying low speed targets at the distances up to 2 km. Laying on the ground targets is done by the commander through TKN-5 sight, on aerial and high-altitude targets - through anti-aircraft sight PZU-7. In azimuth, laying is circular by means of electrical-mechanical drives.

The machine gun unit of fire is 450 rounds that are stacked in three magazines, one of which is installed on the machine gun mount. Atlet ARRV crew is armed with three AK-47 sub-machine guns, one 26 mm caliber signal gun and 10 hand grenades of F-1 type. Sub-machine guns unit of fire is 450 rounds stacked in 15 magazines. As required by the customer Atlet ARRV armament can be changed or added.

PROTECTION AND LIFE SUPPORT SYSTEMS

To provide a high survivability level in combat conditions the hull of Atlet ARRV provides protection of the crew and its main assembly units and systems from large-caliber small arms armament and from small-caliber artillery systems in front arc.

To fight the fire, quick-acting dual action fire-fighting equipment with heat sensors is installed in the ETC compartment and machinery space. Optical sensors are installed in the manned compartment.

Atlet ARRV PROTECTION AND LIFE SUPPORT SYSTEMS Atlet ARRV PROTECTION AND LIFE SUPPORT SYSTEMS

Two hand fire extinguishers are also provided in the stowage. Heating and air-conditioning systems can be fitted in manned compartment of Atlet ARRV to provide for functioning in different climatic conditions. PRHR and FVU systems ensure negotiating through and functioning in the contaminated terrain. The hydraulic pneumatic cleaning system provides for cleaning of crew observation devices. The above systems are similar to the systems of the basic tank.

Atlet ARRV PROTECTION AND LIFE SUPPORT SYSTEMS Atlet ARRV PROTECTION AND LIFE SUPPORT SYSTEMS

Atlet ARRV TRANSPORTABILITY

Atlet ARRV can be transported by ground, river, sea and air transport without limitations in distance. On the general use roads transportation can be effected on its own using the rubber-padded shoe tracks and by means of trailers of up to 50 t capacity and heavy haulers capable of hauling the trailer of total weight not less than 60 t.

By air it can be transported by cargo aircraft with fuselage loading of An-124 type. By river and sea Atlet ARRV can be transported in holds and on decks with loading and unloading by means of crane equipment and on its own. By railway transportation can be done at cargo platforms of at least 10 m long and 2870 mm wide.

Atlet ARRV TRANSPORTABILITY Atlet ARRV TRANSPORTABILITY

General characteristics:

Description Measurement unit Value
Vehicle type armoured repair and recovery vehicle based on T-80UD tank chassis
Operating weight t 46
Crew 3
6TD-2 engine power output kW (hp) 882 (1200)
Power-to-weight ratio kW/t(hp/t) 19,2 (26,1)
Ground pressure kg/cm² 0.93
Maximum speed km/h 65

Dimensions

- length mm 8890
- width mm 3560
- height (including NSVT-12.7 AAMG) mm 2740

Cruising range

- road km 450
- cross-country km 360

Deep fording

- without preparation m 1,8
- with preparation m 5
Main winch
Maximum traction force kN 250
Rope operational length m 130
Rope winding and unwinding speed
at force up to 250 kN
m/min 10
Drive mechanical
Auxiliary winch
Maximum traction force kN 9
Operational rope length m 260
Drive hydrostatic
Dozer blade
Width mm 3380
Maximum bite mm 300
Blade performance (clay terrain) m3/h 120
Crane
Maximum capacity t 25
Maximum radius m 6.8
Jib swinging angle ° 0 - 75
Jib traversing angle ° 360
Crane traversing speed r/m 0.2 - 1.5
Hook lowering and hoisting speed m/min 0.2 - 6
Loading platform
Loading area mm 1200x1900
Carrying capacity kg 1500
Welding outfit
Welding current A 300
Maximum electrode diameter mm 5
 

Armoured repair recovery vehicle Atlet ARRV

 -

( ) 
 -

 

-84

( )
.,126
.
61001
Tel.: +380 (577) 57 41 44
Fax: +380 (577) 57 41 01, +380 (577) 57 41 68
www.morozov.com.ua/rus
marketing@morozov.com.ua