|
The refuse collection vehicle is based on the chassis of the MT-3 tractor and is fitted with a vacuum device, rotating brush and refuse container located on the cargo platform of the MT-3.
The vehicle is intended to clear away refuse, dust, fallen leaves, etc from the pavements, roads and parks.
The clearing is carried out by means of sucking the refuse into the refuse collection container through the inlet branch pipe.
The sucking-in is ensured by a centrifugal fan driven by the power take-off shaft through a belt.
The efficiency of dust collection is further increased with the aid of a rotating brush installed in the inlet device and driven by the power take-off shaft.
Technical characteristics:
| Overall dimensions |
4,050x1,140x1,420 mm |
| Loaded weight |
1,380 kg |
| Operational width of the brush |
1.3 m |
| Operational capacity |
6,500 m2 |
| Wheelbase |
1,400 mm |
| Track |
900-1,400 mm |
| Ground clearance |
300 mm |
| Min turning radius |
2.6 m |
| Fording |
0.5 m |
| Wheel tyres |
8.3-20" |
|
|
MT-3 refuse collection vehicle
|
